ISCO 710 Doppler Flowmeter Module
Menu
Accueil > La qualité de l’eau > Type de produit > Automatic Water Samplers > ISCO Sampler Accessories > 700 Series Modules > ISCO 710 Doppler Flow Meter Module

ISCO 710 Doppler Flow Meter Module

  • Flow and level measurement in streams Triggering the 6712 sampler based on level or flow
  • Stormwater monitoring & Combined sewer overflow studies
  • Non-contacting ultrasonic sensor
  • Current flow and level values are viewable on the sampler's LCD display and logging software
Options de produit

Description

The ISCO 710 Doppler flowmeter module for open channels, streams and culverts plugs into the 6712 Sampler to create a combination sampler and flowmeter. The doppler sensor mounts above the flow stream and a pulse of sound is transmitted and reflected back from the surface of the liquid. The time elapsed between transmission and receiving the echo is proportional to the level of the liquid, which is then converted into flow rate by the sample controller.. The liquid level is then converted into flow rate by the sampler controller. To ensure measurement accuracy a temperature probe that's built-in to the sensor automatically compensates for changes in air temperature.

The 710 doppler flowmeter is the ideal choice for measuring flow streams with corrosive chemicals, suspended solids, high concentrations of grease, or silt, as the sensor does not contact the flow stream. This also gives long term dependability and reduces maintenance.

Standard Features of the 710 Module

  • Ultrasonic, non-contacting sensor unaffected by the composition of flow streams.
  • LCD display shows current flow and level values during operation.
  • All level data stored in the sampler is available for retrieval and can be used in reporting, graphing and analysis using Flowlink software.
  • Built-in flow conversions for most applications including Manning formula, flumes and weirs, data points, or equations for special situations.

Fabriqué par: Teledyne ISCO
Modéle: ISCO 710 Doppler Flow Meter Module

Les services offerts pour ce produit

  • Vente
  • Location
  • Installation
  • Étalonnage
  • Entretien
  • IoT Cloud Compatible

Téléchargements

Data Sheet Manual

Produits associés

ISCO 701 pH / Temperature Module

ISCO 701 pH / Temperature Module

The 701 pH / Temperature module plugs into the 6712 sampler to provide pH and temperature monitoring and logging. The 701 module can be used to trigger ISCO auto-samplers to collect samples only when a specific, user-set parameter limit has been exceeded.
ISCO 720 Submerged Probe Flow Module

ISCO 720 Submerged Probe Flow Module

The 720 flow module's probe is mounted at the bottom of a channel, and measures the level of a flow stream using a differential pressure transducer. Built-in conversions in the 6712 sampler then convert the level measurement into flow rate.
ISCO Bubbler Flow Monitor

ISCO Bubbler Flow Monitor

The ISCO 730 Bubbler Flow Monitor forces a metered amount of air through a bubble line submerged in the flow channel using a built-in air compressor. Water level is determined by measuring the pressure needed to force air bubbles from the line, which is then converted into flow rate.
ISCO 750 Area Velocity Flow Monitor

ISCO 750 Area Velocity Flow Monitor

The 750 module's sensor uses patented doppler technology to measure average velocity directly in the flow stream. In applications where weirs or flumes are not practical, or where full pipe, surcharged and reverse flow conditions may occur, the 750 module gives greater accuracy.
ISCO 780 Analog Output Flow Module

ISCO 780 Analog Output Flow Module

The 780 Analog Output Flow Module interfaces between a 6700 Series Sampler and analog data from other equipment. For example, the 780 Module can use the flow signal from flow meters that output a 4-20 mA signal to pace a 6712 or 6700 sampler.
© RS Hydro 2025. Tous les droits sont réservés.