700 Series Modules for 6712 Autosampler

ISCO 701 pH / Temperature Module

The 701 pH / Temperature module plugs into the 6712 sampler to provide pH and temperature monitoring and logging. The 701 module can be used to trigger ISCO auto-samplers to collect samples only when a specific, user-set parameter limit has been exceeded.

Voir le produit >>

ISCO 710 Doppler Flow Meter Module

The ISCO 710 Doppler Flowmeter Module for open channel flow measurement plugs into a 6712 Sampler, creating a combination sampler and flow meter. The sensor mounts above the flow stream and a sound pulse is transmitted and reflected back from the surface of the liquid.

Voir le produit >>

ISCO 720 Submerged Probe Flow Module

The 720 flow module's probe is mounted at the bottom of a channel, and measures the level of a flow stream using a differential pressure transducer. Built-in conversions in the 6712 sampler then convert the level measurement into flow rate.

Voir le produit >>

ISCO Bubbler Flow Monitor

The ISCO 730 Bubbler Flow Monitor forces a metered amount of air through a bubble line submerged in the flow channel using a built-in air compressor. Water level is determined by measuring the pressure needed to force air bubbles from the line, which is then converted into flow rate.

Voir le produit >>

ISCO 750 Area Velocity Flow Monitor

The 750 module's sensor uses patented doppler technology to measure average velocity directly in the flow stream. In applications where weirs or flumes are not practical, or where full pipe, surcharged and reverse flow conditions may occur, the 750 module gives greater accuracy.

Voir le produit >>

ISCO 780 Analog Output Flow Module

The 780 Analog Output Flow Module interfaces between a 6700 Series Sampler and analog data from other equipment. For example, the 780 Module can use the flow signal from flow meters that output a 4-20 mA signal to pace a 6712 or 6700 sampler.

Voir le produit >>