ISCO Area Velocity Flow Monitor
Menu
Accueil > La qualité de l’eau > Type de produit > Automatic Water Samplers > ISCO Sampler Accessories > 700 Series Modules > ISCO 750 Area Velocity Flow Monitor

ISCO 750 Area Velocity Flow Monitor

750 Area Velocity Flow Monitor
  • Choice of Level Ranges Choice of standard (10 ft) and extended (30 ft) level measurement range
  • Flow Accessory for Sampler 750 can be connected to 6700 series samplers or the Avalanche sampler to calculate flow rate
  • All level and flow data available on Sampler Display and Log Data can be retrieved using ISCO FlowLink Software
Options de produit

Description

The ISCO 750 Area Velocity Flow Meter module's sensor uses patented doppler flow meter technology to measure average velocity directly in the flow stream. Flow area is determined by measuring the depth of the stream using an integral pressure transducer. Flow rate is then calculated in the 6712 sampler by multiplying average velocity by the area of flow.

In applications where weirs or flumes are not practical, or where full pipe, surcharged and reverse flow conditions may occur, the 750 area velocity flow module gives greater accuracy. The shorter wavelength of 1 MHz systems does not penetrate into flow streams as deeply as Isco's exclusive 500 kHz doppler which can cause 'nearsighted' velocity measurements. The flow stream is continuously profiled by the doppler flow monitor, eliminating profiling and calibration required by electromagnetic systems. With area velocity flow measurement you don't have to estimate the slope and roughness of the channel.

Standard Features of the 750 Module

  • 10ft standard level measurement and 30ft level measurement range.
  • Streamlined, sealed area-velocity sensor resists fouling by oil and grease and sheds debris.
  • All level and velocity data stored in the sampler is available for retrieval and can be used in reporting, graphing and analysis using Flowlink software.
  • LCD display can be used to view current flow, level and velocity values

Fabriqué par: Teledyne ISCO
Modéle: ISCO 750 Area Velocity Flow Monitor

Les services offerts pour ce produit

  • Vente
  • Location
  • Installation
  • Étalonnage
  • Entretien
  • IoT Cloud Compatible

Téléchargements

Data Sheet Manual

Produits associés

ISCO 701 pH / Temperature Module

ISCO 701 pH / Temperature Module

The 701 pH / Temperature module plugs into the 6712 sampler to provide pH and temperature monitoring and logging. The 701 module can be used to trigger ISCO auto-samplers to collect samples only when a specific, user-set parameter limit has been exceeded.
ISCO 710 Doppler Flow Meter Module

ISCO 710 Doppler Flow Meter Module

The ISCO 710 Doppler Flowmeter Module for open channel flow measurement plugs into a 6712 Sampler, creating a combination sampler and flow meter. The sensor mounts above the flow stream and a sound pulse is transmitted and reflected back from the surface of the liquid.
ISCO 720 Submerged Probe Flow Module

ISCO 720 Submerged Probe Flow Module

The 720 flow module's probe is mounted at the bottom of a channel, and measures the level of a flow stream using a differential pressure transducer. Built-in conversions in the 6712 sampler then convert the level measurement into flow rate.
ISCO Bubbler Flow Monitor

ISCO Bubbler Flow Monitor

The ISCO 730 Bubbler Flow Monitor forces a metered amount of air through a bubble line submerged in the flow channel using a built-in air compressor. Water level is determined by measuring the pressure needed to force air bubbles from the line, which is then converted into flow rate.
ISCO 780 Analog Output Flow Module

ISCO 780 Analog Output Flow Module

The 780 Analog Output Flow Module interfaces between a 6700 Series Sampler and analog data from other equipment. For example, the 780 Module can use the flow signal from flow meters that output a 4-20 mA signal to pace a 6712 or 6700 sampler.
© RS Hydro 2025. Tous les droits sont réservés.