ISCO 780 Analog Output Flow Module
Menu
Accueil > La qualité de l’eau > Type de produit > Automatic Water Samplers > ISCO Sampler Accessories > 700 Series Modules > ISCO 780 Analog Output Flow Module

ISCO 780 Analog Output Flow Module

780 Analog Output Flow Module with wires
  • 6712 sampler with 780 module can interpret any 4-20 analog signal and use it to pace the sampler
  • Data stored digitally for later retrieval
Options de produit

Description

The ISCO 780 Module interfaces between a 6700 Series Sampler and analog data from other equipment. For example, if you have flow meters that output a 4-20 mA signal, the ISCO 780 Module can use the flow signal to pace your 6712 or 6700 sampler. The signal is also converted to digital so that data can be stored for future retrieval and analysis using Flowlink Software and displayed in real time.

If the signal is not flow proportional , real time information is displayed in a simple, easy-to understand percentage of full scale. Sampling routines or individual samples can be initiated using this signal. The ISCO 780 is supplied with a cable with attached twin leads which can be connected to your analog signal and used to program the sampler.

Standard Features of the 780 Module

  • Sampler pacing in actual flow units instead of an arbitrary number of flow pulses.
  • Flow proportional signal converted to selectable flow units which enables the 6700 sampler to diaplay totalized flow and real time flow rate

Fabriqué par: Teledyne ISCO
Modéle: ISCO 780 Analog Output Flow Module

Les services offerts pour ce produit

  • Vente
  • Location
  • Installation
  • Étalonnage
  • Entretien
  • IoT Cloud Compatible

Téléchargements

Data Sheet Manual

Produits associés

ISCO 701 pH / Temperature Module

ISCO 701 pH / Temperature Module

The 701 pH / Temperature module plugs into the 6712 sampler to provide pH and temperature monitoring and logging. The 701 module can be used to trigger ISCO auto-samplers to collect samples only when a specific, user-set parameter limit has been exceeded.
ISCO 710 Doppler Flow Meter Module

ISCO 710 Doppler Flow Meter Module

The ISCO 710 Doppler Flowmeter Module for open channel flow measurement plugs into a 6712 Sampler, creating a combination sampler and flow meter. The sensor mounts above the flow stream and a sound pulse is transmitted and reflected back from the surface of the liquid.
ISCO 720 Submerged Probe Flow Module

ISCO 720 Submerged Probe Flow Module

The 720 flow module's probe is mounted at the bottom of a channel, and measures the level of a flow stream using a differential pressure transducer. Built-in conversions in the 6712 sampler then convert the level measurement into flow rate.
ISCO Bubbler Flow Monitor

ISCO Bubbler Flow Monitor

The ISCO 730 Bubbler Flow Monitor forces a metered amount of air through a bubble line submerged in the flow channel using a built-in air compressor. Water level is determined by measuring the pressure needed to force air bubbles from the line, which is then converted into flow rate.
ISCO 750 Area Velocity Flow Monitor

ISCO 750 Area Velocity Flow Monitor

The 750 module's sensor uses patented doppler technology to measure average velocity directly in the flow stream. In applications where weirs or flumes are not practical, or where full pipe, surcharged and reverse flow conditions may occur, the 750 module gives greater accuracy.
© RS Hydro 2025. Tous les droits sont réservés.